Refinishing and colour matching · Fords, New Jersey
Auto painting
matched to the car you actually own.
Leslie's Auto Body refinishes vehicles at its Fords, New Jersey shop using colour matching to the factory paint code, for full resprays and for spot repairs after panel work. Refinishing is done in-house alongside the body repair, so the paint work and the structural work are handled by the same shop and covered by the same lifetime workmanship warranty.

What actually happens
Step by step, from the customer’s side of the counter.
The paint code on your door jamb is where matching starts, and it is not where it ends. One factory colour is usually produced in several field variants: different plants, different batches, and then years of sun on your particular roof. Matching means finding the right variant, not reading the code.
The second half is blending. New colour is faded into the neighbouring panels rather than stopped at a hard panel edge, because a perfect match that ends in a line is still visible from ten feet away in the right light.
It happens here, in the same building as the body work, which is why the paint and the panel underneath it are covered by one warranty rather than two.
- 01
Read the code, then question it
The factory code narrows it to a family. Which variant of that family your car actually wears depends on where and when it was built, and on how long it has been outside since.
- 02
Measure the panel you still have
The undamaged paint next to the repair is the real reference. Reading it directly is what turns a close guess into a match, because it accounts for the fade the code cannot know about.
- 03
Spray out and compare
The mixed colour goes onto a test card, is cured, and is held against the car in daylight before a drop of it touches a panel. If it is not right, it gets adjusted and done again.
- 04
Prep, which is most of the job
Sanding, filling, priming and masking take longer than spraying does. Paint hides nothing: every imperfection under it is still there afterwards, magnified by gloss.
- 05
Blend into the neighbours
The new colour is faded into the adjacent panels so there is no edge to find. This is the difference between a repaired car and a car with a repaired panel on it.
- 06
Clear, cure and polish
Clear coat over the top, cured, then finished so the repair reads the same as the factory surface beside it in the same light.
How pricing works
Refinishing is priced by area, access and colour, not by the panel count.
A single flat panel in a solid colour is a straightforward job. The same panel in a three-stage pearl, or a colour that has faded unevenly across a roof, is not. The difference is in how many blend panels are needed to make the repair disappear, and that is decided by the car rather than by a price list.
Spot repairs after panel work are quoted as part of the collision estimate rather than separately, because the paint and the metalwork are the same job.
Estimates are free, written from the car, and carry no obligation.
We publish no paint price list because an honest one does not exist: two identical dents on two identical cars can need different amounts of blending.
From this shop
Real cars, photographed here.
Photographs from our own shop and our Google profile. These are different vehicles, not before-and-after pairs of one job.




Lifetime
Workmanship warranty, in writing
4.9 / 5
61 Google reviews
Google Maps40+ years
The shop on King Georges Post Rd
Free estimate
Let’s take a look
at your car.
Tell us what happened and we’ll discuss the repair. Your estimate is free and carries no obligation.
(732) 738-1948Mon–Fri 8:30–5:30 · Sat 9:00–1:00
Request a free estimate
Auto Painting and Refinishing questions
The things people ask before they call
That is the intent, and it is the part customers notice. Refinishing is matched to your factory colour and blended into the surrounding panels rather than stopping at a hard edge, so the repaired area is not visible as a repair. Colour matching is done here, alongside the body work.
Because one standard colour is usually produced in three to six variants in the field. Different plants, batches and ages produce measurably different results from the same code. Matching means selecting the right variant against the paint your car is actually wearing today, not the paint it left the factory in.
Blending fades the new colour into the panels either side of the repair instead of stopping at a panel edge. It uses more material and more labour, and it is the single thing that decides whether a repair is invisible. A shop that skips it is saving its own time, not yours.
Yes, full resprays are done here. They are a different kind of job from a collision refinish: more prep, more masking, and decisions about door jambs and engine bays that change both the cost and the timeline. Come in and we will walk through the options in front of the car.
A spot repair on a sound panel can be quick. A respray with heavy prep, or a colour that needs several blend panels, takes considerably longer, and cure time is not something that can be hurried without costing you durability. You get a timeframe with the estimate.
Modern refinish systems are formulated to age with the factory finish, and blending into the neighbouring panels means any small difference is spread rather than concentrated at an edge. Keeping the car washed and out of long periods of direct sun helps every panel age evenly, new and old alike.
Yes. Plastic needs its own preparation and a flex additive so the finish moves with the part rather than cracking off it. It is refinished to the same colour standard as the metal panels either side, which is what stops a repaired bumper reading as a replacement.
Yes. Every repair carries a lifetime workmanship warranty: if a workmanship-related issue arises with the repair, it is corrected at no cost for as long as you own the vehicle. Replacement parts carry whatever warranty their own manufacturer provides. The workmanship guarantee is ours, and it does not expire on a date.
You can start one. Call us or use the estimate form to describe the damage, and we will discuss the repair and what happens next. A final figure still needs the car in front of us, because the damage under a panel is the part a photograph never shows.
Not as a separately marketed service. Where a dent can be worked without refinishing we will tell you, but we do not advertise PDR as its own product, and we would rather say so than take the booking and subcontract it out. Bring the car in and you will get a straight answer.
One phone call and the car stops being your problem.
Free estimate, no obligation, and asking does not start a claim. A person answers the phone.
